1884 Eastman Ave.,
Bldg. 112
Ventura, California
93003 USA
t: 805 654-7000
f: 805 654-7064
JetAir Technologies pre-programs and runs each system before it is shipped from our factory warehouses. If your system is not running smoothly, we reccomend a handful of
trouble-shooting oberservations that have helped customers in the past.
| Problem Solution | Support |
| Non-Start | Check wiring. Confirm voltages and phases. |
| Low Flow, Pressure or Vacuum | Impeller is rotating backwards. Dirty Filter. Collapsed Flex Hose or Piping. Damaged Impeller. Closed Butterfly Valve. Undersized Piping/Hose volume. Air Leakage. Loose V-Clamp. Obstructed air inlet. Drive programming change. |
| Electrical Overloading | Exceeding designed blower flow. Blower rpm too high. Motor damage. Drive damage. Electrical supply problems. Blower not connected to piping. |
| Irregular Noise | Blockage in piping. Leakage in piping. Cracked hoses. Loose bolts on mounts. Vibrations from other machines. Blocked Intake or Exhaust |
If you are still having problems, contact JetAir or your Distributor immediately.
24/7 Response
Call your assigned number. (Special Program)
8am - 5pm PST
Main Telephone: 805-654-7000
Facsimile: 805-654-7064; Email: support@jetairtech.com
Post
JetAir Technologies, LLC, 1884 Eastman Avenue, #112
Ventura, California 93003 USA
